How to Make Cushion Covers Like Pro | 9 Simple Steps By Step Guide
How to Make Cushion Covers
The simple yet effective addition of colorful and stylish cushion coverings to any living area. Without having to completely redecorate or rearrange the furniture, they may drastically alter the appearance of a space.
Although there are many places to purchase cushion covers that have already been created, creating your own at home may be a gratifying and enjoyable DIY project.
Making your own cushion covers enables you to tailor them to your unique taste and preferences, whether you are an experienced crafter or a novice eager to take on a new project.
This article will walk you through the procedures of how to make cushion covers at home.
Materials Needed:
How to Make Cushion Covers Step by Step
Step 1: Measure Your Cushion
Take Measurements of Your Cushion’s Width, Height, and Depth Using a Measuring Tape. For Seam Allowances, Multiply Each Measurement by One Inch.
Step 2: Cut Your Cloth
Using the measurements you got in Step 1, cut two pieces of fabric. Your cushion cover’s front and back will be made up of these two sections.
Step 3: Pin the Fabric
Place the two pieces of cloth right sides facing each other and pin them together. They should be pinned in place with one side left free to accommodate the cushion.
Step 4: Sewing the Fabric
Sew the fabric’s edges, giving a little seam allowance, using a sewing machine or a needle and thread. To keep the corners from unraveling, reinforce them.
Step 5: Add Fasteners (Optional)
You may add fasteners, such as zippers or buttons, to the open side of the cushion cover if you wish to be able to remove it quickly for cleaning or changing.
Step 6: Right-side-out the Cover
Pull the cover through the open side to make it right-side-out. Use a blunt tool, such as a pencil or chopstick, to push out the corners.
Step 7: Insert the Cushion
Make sure the cushion fits snuggly within the cover before inserting it.
Step 8: Close the Cushion Cover
To shut the cushion cover, stitch up the exposed side using a needle and thread.
step 9: Finish the edges (optional)
You can choose to hem the cushion cover’s edges or apply bias tape to the corners.
How to Make Cushion Covers with Piping
Step 1: Cut fabric for the cushion cover and piping into strips.
Step 2: Sew strips of fabric around the piping cord.
Step 3: With the raw edges of the piping facing each other, attach it to the cushion cover front.
Step 4: Use a zipper foot to sew the piping into place.
Step 5: With piping in the middle, secure the back piece to the front piece by pinning.
Step 6: Leaving a hole for the cushion insert, sew around the edges.
Step 7: Insert cushion after turning right side out.
Step 8: Close the opening by hand sewing.
How to Make Cushion Covers Without a Zip
Step 1: Cut the cushion cover cloth to the desired size.
Step 2: Right sides of the cloth facing each other, fold in half, and pin the edges.
Step 3: Leaving a tiny hole for the cushion insert, sew around the edges.
Step 4: Insert cushion after turning right side out.
Step 5: Close the opening by hand sewing.
How to Make Cushion Covers with Edging
Step 1: For the cushion cover and edge trim, cut the cloth.
Step 2: With the raw edges touching, secure the edging trim to the cushion cover’s front piece.
Step 3: Utilising a zipper foot, sew the edging into place.
Step 4: Sandwiching the edging between the back and front pieces, and pin them together.
Step 5: Leaving a hole for the cushion insert, sew around the edges.
Step 6: Insert cushion after turning right side out.
Step 7: Close the opening by hand sewing.
Cushion Cover Sewing Pattern:
Step 1: Pick a cushion cover pattern and cut the cloth in accordance with the directions.
Step 2: As directed by the design, pin the parts together.
Step 3: Connect the parts with a sewing machine.
Step 4: Insert cushion after turning right side out.
Step 5: Close the aperture by hand sewing if required.
How to Make Professional Cushion Covers
Step 1: Pick fabric of the highest grade.
Step 2: Accurately measure and cut the cloth.
Step 3: Pieces should be joined with a sewing machine.
Step 4: Add finishing touches like piping or edging.
Step 5: Make sure the finish is clean and expert.
How to Make a Cushion Cover by Hand
Step 1: Size the cloth as required.
Step 2: Right sides of the cloth facing each other, fold in half, and pin the edges.
Step 3: Leaving a tiny hole for the cushion insert, sew around the edges.
Step 4: Insert cushion after turning right side out.
Step 5: Close the opening by hand sewing.
Typical Sizes Cutting Guide:
Use the cutting guide below when creating cushion coverings for common sizes.
Design Ideas for How to Make Cushion Covers:
Mix and Match Fabrics: Utilise various materials for the front and back of the cushion cover to give it a distinctive appearance. The edges might also have a striking trim added.
Add Texture: To give your cushion coverings depth and intrigue, experiment with different textures like velvet, linen, or fake fur.
Applique: Using appliqué to create a design or pattern on your cushion cover can give it a more unique touch. For this, you can use buttons, lace, or even cloth.
Paint or a Stencil: If you’re feeling crafty, you may add a design or pattern to your cushion cover using fabric paint or a stencil. This is a terrific method to design a look that is unique to you and showcases your sense of style.
Use Decorative Stitching: Use decorative stitches on the seams or edges of your cushion cover to add interest. You may stitch this by hand or on a sewing machine.
Embellishments: To give your cushion covers a distinctive and customized look, add embellishments like beads, sequins, or embroidery.
To get you started, here are just a few design concepts. Feel free to explore and have fun with your cushion cover designs because there are countless options.
Tips for Cushion Covers Making
What supplies will I require to construct a cushion cover?
A sewing machine, measuring tape, fabric, thread, scissors, and a cushion insert are all necessary.
Is it possible to construct a cushion cover without a zip?
Yes, envelope-style closures or buttons can be used in place of zippers to create cushion covers.
How can I embellish my cushion cover with piping or edging?
Before sewing the cushion cover together, attach the piping or edging to the fabric using the piping or edging foot of your sewing machine.
How do I hand-sew a cushion cover?
By utilizing a needle and thread and the same procedures as before, you can hand-sew a cushion cover.
Do I need a sewing pattern for cushion covers?
A sewing template can assist ensure a proper fit for your cushion cover even if it is not required.
What are some pointers for creating a cushion cover that looks polished?
Always double-check your dimensions and stitches before cutting or stitching. Use a rotary cutter for neat edges. Think about adding a lining for longevity.
Conclusion
DIY cushion cover projects may be enjoyable and satisfying. You may produce stunning cushion covers with piping, edging, or without a zip by following the directions given above.
There are a variety of design possibilities and patterns available, whether you’re a novice or an expert seamstress.
You can guarantee a polished finish and a great fit for your pillows by taking your time and heeding the advice given. So why not give it a try and include handmade cushion covers in your home decor?
